Sine Wave Generator

A sine wave is the purest sound there is: one frequency, no harmonics, nothing extra. Dial in any frequency from 1 Hz to 20,000 Hz, pick one of the quick presets, and play — entirely in your browser, nothing to install.

What exactly is a sine wave?

A sine wave is the fundamental shape of sound. Its pressure rises and falls in a smooth, perfectly regular curve — the same curve that describes a pendulum, a vibrating guitar string at its simplest, or the rotation of a wheel projected sideways. What makes it special in audio is that it contains one and only one frequency: 440 Hz played as a sine wave is 440 Hz and literally nothing else. Every other waveform in existence is built by stacking sine waves together — a fact so central to engineering that it has its own name, Fourier's theorem. Square waves, sawtooth waves, the sound of your voice, the noise of a waterfall: all of them are sums of sines.

That purity is why the sine wave is the reference signal of acoustics. When a specification sheet says a speaker "covers 45 Hz to 21 kHz," the measurement was made with sine tones, because a pure tone interrogates exactly one frequency at a time and cannot hide behind harmonics. When a hearing clinic measures your sensitivity, it plays sine tones. When an oscillator is judged, it is judged by how close its output comes to a mathematically perfect sine — the residual impurities are called distortion, and better equipment has less of it.

How to use this generator

Type any frequency between 1 and 20,000 Hz, set a comfortable starting volume (about 30%), and press play. The tone continues until you press stop, so the page doubles as a steady reference drone. The presets cover the most common jobs: 50 and 100 Hz for bass-driver and hum checks, 440 Hz for the concert-pitch reference, 1 kHz for the universal level and equipment standard, and 5 and 10 kHz for high-frequency response and hearing checks.

Three settings tips improve every session. Start quiet and raise the volume only until the tone is clearly audible — sine tones carry their energy in a very narrow band, and it is easy to overdrive a small speaker without noticing. Change frequencies while the tone is playing; the generator retunes instantly, which makes walking up and down a band of frequencies fast and intuitive. And remember your equipment's floor: small laptop and phone speakers cannot reproduce much below 150–200 Hz, so a 50 Hz setting may sound silent or faint — that is the speaker, not the tool. Headphones reach lower.

What people use pure tones for

Testing speakers, headphones and rooms

Step the frequency upward in comfortable jumps — 50, 100, 200, 500 Hz, then 1, 2, 4, 8, 12 and 16 kHz — and listen at each step for smoothness. A healthy system sounds even; buzzes, rattles, sudden dropouts or distorted notes all localise a fault to the frequency where they appear. Once you have found a suspicious band with single tones, confirm it with a continuous glide on the sweep generator, which travels the same territory without gaps.

Referencing pitches for music

A steady 440 Hz tone is the concert-pitch reference that orchestras, tuners and ensembles standardise on. Musicians use sine references because beats are easiest to hear between pure tones: play 440 Hz plus your instrument's A, and any wobble points straight at a tuning error — the method is laid out on the multiple tones page. Voice teachers and choruses also use long steady tones for pitch-matching and breath-control drills.

Hearing checks and tinnitus comparison

Because each sine tone tests exactly one frequency, stepping upward through the range gives a rough picture of where your hearing fades — the same logic the full hearing test automates. People with tinnitus often use single tones to find the frequency closest to their ringing, then set a matching masking noise. This is self-comparison, not diagnosis; real hearing questions belong with a professional.

Electronics and signal work

A browser sine generator is a legitimate bench tool for quick checks: testing an audio input by feeding it a known tone, verifying a cable end to end, tracing which channel is which, or producing a steady stimulus for a sensor experiment. Accuracy is quartz-derived and excellent — a 1,000 Hz setting arrives within a fraction of a hertz — though output level is uncalibrated, so this supplements rather than replaces instrumentation.

Sine versus other waveforms

Choose sine whenever you are measuring, comparing or tuning — its single frequency keeps results interpretable. The other shapes earn their place in different jobs, and the main tone generator offers all four: square waves stack odd harmonics and expose buzzes and distortion that a sine would hide; sawtooth waves carry both odd and even harmonics and stress equipment with dense energy; triangle waves soften the edge for comfortable low-volume listening. The rule of thumb holds across all of them: measure with sine, stress-test with square or saw, listen with triangle.

Phase, interference and beat frequencies

Two properties make sine waves uniquely predictable: every cycle is identical, and the wave is fully described by just three numbers — frequency, amplitude and phase. Phase is why two speakers playing the same frequency can either reinforce each other or cancel to near silence: if the waves arrive in step, they add; if they arrive shifted by half a cycle, they subtract. This is worth hearing at least once. The multiple tone generator lets you play 440 Hz and 444 Hz together, and you will hear the volume wobble four times per second — that wobble is a beat frequency, the difference between the two tones, and it is the same mechanism musicians use to tune strings by ear. Play two identical frequencies with identical settings and the phase relationship stays locked; play them from two speakers standing in different places and your room geometry supplies the phase shift, producing standing waves, dead spots and hot spots. Room mode problems that home cinema owners chase for weeks are nothing more than this interference pattern, which is also why the bass test tone page tells you to move your listening position before blaming your subwoofer.

A practical map of the frequency spectrum

Knowing what each band does turns a plain sine sweep into a diagnostic instrument. Below 60 Hz lies sub-bass: more felt than heard, it belongs to subwoofers and large drivers, and it is where the bass test page works. From 60 to 250 Hz sits the bass that gives music its punch — kick-drum fundamentals and most of the energy in popular music; a boomy or muddy low end lives here. The 250 Hz to 2 kHz midrange carries almost all of speech and the identity of voices and instruments; if a system sounds wrong with a podcast playing, this is the band to probe. From 2 to 4 kHz your ear is at its most sensitive — a few decibels here sound much louder than the same energy at 100 Hz — and this band is also where noise-induced hearing loss typically shows first, which is why the hearing test pays close attention to it. Above 4 kHz lies the treble where cymbals, consonants like S and T, and airiness live; how far up you can still hear a soft tone at moderate volume is a rough, informal marker of your personal hearing ceiling, and it usually declines with age.

Accuracy and honest limitations

The frequency you set is generated digitally and is accurate to within a few parts per million — far finer than the ear can distinguish. The limitations live downstream. Your sound card's sample rate (44.1 or 48 kHz) caps generation just above 20 kHz; your speakers decide how much of the bottom octave actually sounds; and volume percentages here are relative, not calibrated decibels. At very low settings — under about 20 Hz on ordinary equipment — you may feel vibration rather than hear tone, or hear a faint harmonic instead of the fundamental. None of these are faults of the generator; they are the physics of real-world hardware, and knowing them makes you a better listener.

Frequently Asked Questions

What is a sine wave generator used for?

Producing a single pure frequency for testing speakers, checking hearing ranges, tuning instruments, calibrating audio levels and demonstrating acoustics. Because a sine contains only one frequency, it is the standard signal for any measurement where you need to know exactly what you played.

Is this sine generator really pure?

Digital synthesis produces a mathematically clean sine; the software adds nothing to it. Purity at your ear then depends on your equipment — every real speaker adds some distortion, and better ones add less. The tone leaves the browser far cleaner than any acoustic test signal of the analogue era.

Why can't I hear the tone below 100 Hz on my laptop?

Laptop and phone speakers are physically too small to move enough air for deep frequencies and simply cannot reproduce them. Use headphones or real speakers for anything below roughly 150–200 Hz. The tone is still being generated; you just lack the hardware to hear it.

What frequency should I use to test my speakers?

Walk upward: 50–100 Hz checks bass drivers, 400–1,000 Hz the midrange where voices live, 4–8 kHz presence and detail, and 10–16 kHz the tweeter. Listen for buzzes, rattles and dropouts at each step, and compare left and right speakers separately.

Is listening to sine tones safe?

At modest volume, yes. Keep levels low — a third of your volume control is plenty for testing — and never put your ear against a speaker, especially at high frequencies, which carry more energy than they sound like they do. Ringing or muffled hearing afterwards means the volume was too high.

Can I use this tone as a tuning reference?

Yes — 440 Hz is the international concert pitch (ISO 16). Play it, play your instrument's A, and tune until any wobble between the two disappears. The other note frequencies live on the frequency presets page.