Multiple Tone Generator

Play up to 6 frequencies at the same time. Great for beat frequencies, interference patterns and chord references.

What is a multiple tone generator used for?

How to use it

  1. Set the frequency for tone 1, choose Play All — up to 6 oscillators run at once.
  2. Add a second tone a few Hz away (e.g. 440 and 444 Hz) to hear beats: the volume pulses at the difference, 4 times per second here.
  3. Adjust each tone's volume slider to balance the mix; silence a row to A/B against the single tone.
  4. For binaural beats, use stereo headphones and keep the two frequencies below ~1000 Hz for a clear effect.
  5. Press Stop All when finished — nothing is recorded or uploaded; everything happens in your browser.

Try these combinations

How it works

Each tone runs on its own oscillator, so all frequencies play simultaneously through your speakers. Beat frequency equals the difference between two tones — a classic physics classroom demo.

Understanding beats and interference

Play two tones that differ slightly in frequency — say 440 Hz and 441 Hz — and something surprising happens: instead of two sounds, you hear one tone that pulses about once per second. That pulsing is called beating, and it is pure physics, not a trick of the software. The two waves drift in and out of step with each other. When their peaks align, they add together and the sound swells; when a peak meets a trough, they cancel and the sound dips. The combined loudness rises and falls at exactly the difference between the two frequencies: 1 Hz apart gives one pulse per second, 5 Hz apart gives five.

The perceived pitch sits halfway between the two tones, and the beat rate tells you how far apart they are. This is why piano tuners and guitarists love beats: they are the most sensitive out-of-tune detector that exists. Two strings that are 0.5 Hz apart sound almost identical to the ear, yet produce a beautifully slow, obvious wobble. When the beats slow down and vanish, the strings are in tune — it is the silence between beats that tells you to stop turning the peg.

Push the two frequencies further apart — more than about 15–20 Hz — and the pulses stop sounding like loudness wobbles and start sounding like a rough, rattling quality. Beyond roughly a minor third apart, the ear finally gives up merging them and hears two separate pitches. That journey — one tone, to beats, to roughness, to two notes — is the whole anatomy of musical dissonance, and you can walk through it yourself in thirty seconds with two sliders.

Three hands-on experiments

1. Watch beats appear from thin air

Set tone 1 to 440 Hz and tone 2 to 440 Hz, both sine, and play them together — you will hear one steady tone, slightly louder than either alone. Now lower tone 2 one hertz at a time: 439, 438, 436, 432. A slow breathing pulse appears and speeds up as the gap widens. Somewhere past 15 Hz of separation the pulsing melts into a rough buzz, and by the time you reach 450-plus Hz the pair has split into two distinct notes. You have just demonstrated interference, roughness and dissonance in one sweep of a slider.

2. Tune two instruments by ear

Play 440 Hz and ask a guitarist or violinist to play their A. Any mismatch becomes an audible wobble whose speed equals the tuning error in Hz. Two beats per second means the instrument is 2 Hz flat or sharp; the direction of adjustment can be found by nudging the pitch down slightly — if the beats slow, you were going the right way. Tune until the wobble disappears entirely. This works at any volume, in a noisy room, with zero equipment.

3. Find your room's favourite notes

Rooms ring at certain bass frequencies like a bottle rings when you blow across it. Play a low tone — say 60 Hz — plus a second tone, and sweep the second slowly from 55 to 75 Hz. Where the combined sound suddenly booms, your room has a resonance (a standing wave between two walls). Note them down; those notes are why some songs shake the room and others sound thin. It is also why moving your listening position or subwoofer changes the bass more than any equalizer can.

Beats in the air versus beats in the brain

There are two kinds of "beats" in sound, and they are easy to confuse. The ones on this page are physical: real amplitude swings in the air, measurable with a microphone, audible through a single speaker. They require the two tones to mix in the same channel. Binaural beats are different: each ear receives a completely steady, separate tone (through headphones), and the beat exists only as a perception your auditory system constructs from the two-channel mismatch. Physical beats are used for tuning and acoustics; binaural beats are used for relaxation and focus experiments. If you want the brain-facing kind, use the dedicated binaural beats generator — it keeps the tones separated per ear, which this page deliberately does not.

Technical notes and limitations

Each channel here is a separate oscillator with its own frequency, waveform and level, all mixed into one output. Keep a few limitations in mind. Distortion: playing many loud tones at once can overload your sound card or speakers, producing extra "difference tones" that are not in the sliders — if you hear a mysterious low pitch, lower the volumes before trusting what you hear. Speaker intermodulation: cheap drivers, not the audio file, create sum-and-difference products; a proper test separates sources with headphones. Phase: two identical frequencies from one speaker add cleanly, but from two physically separated speakers their interaction changes as you move your head — that is interference in space, which is exactly how venue sound systems are tuned. None of this makes the tool less useful; it just means the interesting artefacts you sometimes hear are part of acoustics, working exactly as physics intends.

Combining tones with pure single tones

Everything on this page plays two or more tones together, and the simplest possible version of that idea is one clean wave all by itself. When you want to hear what a single component sounds like before you add the second, the dedicated sine wave generator gives you one pure frequency with the same kind of controls. It is also the quicker tool when a test calls for a single reference note and you have no need for mixing at all — many speaker checks only ever need one tone at a time, and starting there keeps the result easy to interpret.

Frequently Asked Questions

What is a beat frequency?

Play two tones a few Hz apart (e.g. 440 and 444 Hz) and you hear a single tone whose loudness pulses 4 times per second. Your ears sum the two waves, and the pulse rate equals the frequency difference. Musicians use beats to tune by ear: zero beats means perfectly in tune.

How many tones can I play at once?

Up to 6 here. There's no hard technical limit in your browser, but beyond a handful the combined wave gets muddy and loud — watch your volume.

What are binaural beats?

Play a slightly different frequency in each ear (headphones required) and your brain perceives a phantom pulse at the difference. Some people find them relaxing; scientific evidence for cognitive benefits is weak.

Can I play more than two tones at once?

Yes. You can run up to 6 independent tones simultaneously, each with its own frequency and volume. All oscillators start together when you press Play All.

Do binaural beats really work?

The beating sensation is real physics: two close frequencies create an audible pulsation. Many people find low binaural beats relaxing, but scientific evidence for deeper effects (focus, healing) is mixed — treat it as a pleasant listening experience, not therapy.

Why do I need headphones for binaural beats?

Binaural beats depend on each ear receiving a different frequency. With speakers both tones mix in the air, so you hear ordinary beats instead of the inside-your-head binaural effect.

Will playing several tones at once damage my speakers?

Not at moderate volume. Summing tones raises peak level, so keep the master volume low and increase gradually. Clipping sounds harsh — back off if it does.

Is there a limit on how long it plays?

No. Tones keep playing until you press Stop All, and nothing is uploaded or recorded — the page runs entirely locally.

Can I use this on my phone?

Yes, the page works in modern mobile browsers. For the cleanest result use headphones and keep the screen awake while playing.

Common questions about playing multiple tones at once: